ESAB Migmaster 300i cvcc, Руководство по обслуживанию и ремонту

Страница: 30 / 48

30
Table 5-5. Migmaster 300i cvcc MANUAL SET-UP for the MIG Process - (Cont)
Action
Select normal or slow run-in wire speed at start.
Note: START TYPE options are listed in Table 4-3.
Use or to set BURNBACK time if needed.
Display
SEL START TYPE
normal >
TRIM BURNBACK
v
0.20 seconds ^
The shaded boxes are the only settings required to be changed by the operator to find the welding condition.
The non-shaded boxes provide advanced settings or other special functions and are detailed under the Migmaster
300i setup options for MIG Process Table 5-4.