47
3.
Assembly
Configurations
-
Drawing 10
Assembly 10: Wiring Diagram
To achieve successful operation at a minimum, ensure the ports below are properly connected.
Software: Basic Settings
1.Set the needed working modes of the unit via the menu
H.2.
If no heating curve is desired:
3.Locate and activate the buffer tank and appropriate pumps under
H.1.
Setting a heating curve:
H.
Configuring the set water heating temperatures:
2.Temperature configuration options for Heating/Cooling circuit 1 are found under
C.Configuring the set water cooling temperature (if applicable):
For
connection
for
mixing
valve 2,please
refers
to
the
appendix
A (
) of
this manual
for
more
information.
on
page 75-76
