42
3BA00068 • 2016-03-07 • Rev. 3
ersa RA 4500
8.
Replacement parts and ordering information
Designation
Order Number
RA 4500 D control station, Output 3000 W
0RA 4500 D
Temperature sensor type J, prefabricated with 8-pin plug stainless
steel protective tube, � 8 mm
0F007
Temperature sensor type J, prefabricated with 8-pin plug “Longlife”
titanium protective tube, � 3 mm
0F008
A range of various solder baths and heating plates is contained in the Ersa catalogues and
on www.ersa.de.
9.
Warranty
© 2016-03-07, Ersa GmbH • 3BA00068 Rev. 3
Ersa has produced these Operating Instructions with the utmost care. Nevertheless, we
cannot provide any guarantee regarding the content, completeness or quality of the in-
formation in these Instructions. The content is regularly updated and adapted to current
conditions.
We have gathered all data published in these Operating Instructions, as well as data on
products and procedures, to the best of our knowledge, by means of state-of-the-art
technical aids. These data are provided without obligation on our part, and do not relieve
the user of the responsibility for inspecting the equipment before its use. We assume no
responsibility for violations of the protective rights of third parties, or for applications
and procedures without our prior express and written confirmation.
Technical information is subject to change without notice in the interest of improving the
product.
Within the bounds of legal possibility, liability for direct damage, consequential damage
and third-party damage resulting from the acquisition of this product are precluded.
All rights reserved. This manual may not be reproduced, transmitted or translated into
another language, even in excerpt form, without the written approval of Ersa GmbH.
Replacement parts and ordering information/Warranty
