E
N
G
L
IS
H
11
INSTALLATION OF THE MOTOR
To install the CICLÓN motor, follow the following steps closely:
1.
Fix bracket
A
to the pillar using rawplugs suited to the pillar material
PLEASE NOTE:
the bracket should be perfectly horizontal. Use a spirit level to accurately position the bracket
2.
Fix the motor reducer onto bracket
A
using the 4 screws
F
and the relevant nuts and washers
3.
Position the straight arm
B
on the motor shaft
4.
Position the casing
C
on the straight arm and tighten the screw
E
after having inserted the washer
D
5.
Release the motor reducer
6.
Close the gate, extend the arm to a maximum of 670 mm and mark the positions of the attachment
H
bracket orifices
7.
Fix the bracket
H
onto the gate by welding or using appropriate screws for the gate-leaf material
