Erie 2400VS Series, Техническое руководство

Страница: 13 / 33

2400VS SERIES
Erie Water Treatment Controls – Belgium
Page 9
Service mode
In service mode the display shows the time of day, the remaining capacity and the water usage indicator:
Every day the control valve automatically recalculates the reserve capacity, as a progressing average. Permanently
it compares the remaining capacity with the calculated reserve capacity; as soon as the remaining capacity equals
the calculated reserve capacity, the display will show the time of day and the indication “REGEN”, indicating that
a delayed regeneration will be started at the pre-programmed time of regeneration:
In case the resin bed is fully exhausted (remaining capacity equals zero) before a delayed regeneration can take
place, the unit will regenerate immediately.
Regeneration mode
In regeneration mode the display shows the total remaining regeneration time, the actual regeneration cycle and
the remaining cycle time:
total remaining actual regen. remaining
regen. time cycle cycle time
The control valve can be
reset to service mode at any time by pressing the scroll button, as such manually
advancing it through the regeneration cycles.
Checking the flow meter
In case of water usage, the remaining capacity counter in the service display will count back per unit, i.e. per litre;
furthermore the water usage indicator will revolve. This way the correct functioning of the water meter can be
verified.
Manual regeneration
It is possible to manually initiate a rgeneration.
1.
Press the scroll button repeatedly until the display shows:
 If the control valve is left in this position, the countdown timer will countdown to 0 sec and start a
regeneration.
 To cancel this mode, press the scroll button before the countdown timer has reached 0 sec; the control
valve will return to the service mode.
20:51 1000L -
20:51 REGEN-
Rgn: 67 Cyc2: 45
Regen in 10 sec