Ericsson EFN324 Скачать руководство пользователя страница 72

Страница: 72 / 176

IndexIndex

When setting the switching rule in the CLI to ‘virtual_mac’, IP validation is
automatically activated.

Assigned virtual MAC addresses are status attributes in the connection
resource.

Suggestion: set max_virtual_mac_addresses to max_dynamic_ip_addresses
plus the number of defined static IP addresses.

8.4

Valid Configuration Combinations for Security

Functions

The following table identifies the valid combinations of the switching_rule and
definitions of uplink and gateway. Switching_rule IP means ip_validation,

switching_rule VMAC means virtual_mac.

switching_rule

normal

VMAC

Forced
forwarding (1)

MAC Forced

Forwarding (2)

Explanation (3)
(see below)

(1) Forced forwarding is enabled when an uplink is defined for a switching

domain.

(2) MAC forced forwarding is enabled when, in addition to an uplink, a

gateway is specified for a switching domain.

(3) The numbers refer to the explanations in the paragraphs below.

The switching domain acts as a normal switch, performing MAC address

learning on the fly. The switching domain may be regarded as a separate
switch, except that the bridging table holding the MAC addresses is global

for the EFN.

When a switching domain has an uplink defined, all packets received on

the downlinks are sent to the uplink, without any destination address
modifications. All ports connected to the switching domain are regarded as

downlinks, except the port marked as uplink. The downlink port is selected

Содержание EFN324

















































































































































































Результаты поиска

Содержание EFN324

Отзывы:

Ericsson EFN324, Руководство пользователя, Страница: 72 / 176

Результаты поиска

Содержание EFN324

Отзывы: