Ericsson EFN324 Скачать руководство пользователя страница 129

Страница: 129 / 176

Glossary

ip_address <IPaddress>

The IP address of the host processor

(EFN324 external IP address). Can be specified as dotted number or

domain name. It may also be undefined. If this parameter is used
(specified or changed), the net_mask parameter must also be specified.

method {static|dhcp} –

The IP address method. “static” allows the

definition of a static IP address for the node, and is used for standalone

nodes. “dhcp” causes the node to send a DHCP request to obtain an IP
address, and is used for embedded nodes.

net_mask <IPnetmask>

The IP address mask.

automatic_configuration <yes|no>

sets the management

connections on the management switching domain 1 for ethernet ports 25
and 26 with ingress and egress tag as 247. (For example vlan 1 in EFN324

is connected with 25,26,host and ingress and egress tag as 247 for
ethernet_ports 25 and 26).

Note:

When the method is

dhcp

and

automatic_configuration is

<yes>

, the EFN 324 will get the IP address dynamically as it sends

the DHCP request to the DHCP server. At the same time the
Management connections with vlan 1 connected to ports 25,26,

host_port ith ingress and egress tag as 247.(This occurs when
automatic_configuration changed from “no” to “yes” and also when the

EFN node restarts with no permanent configuration.)This is used for
EFN as Embedded Node.

Default Setting

method

dhcp

Command Usage

The command is used to set IP parameters that are necessary for the EFN324

to work in the network.

Note:

Resetting the IP address endangers communication with the system
over the network.

Example:

efn#

set cpu ip_address 71.22.33.4 net_mask 255.255.255.0

default_gateway 71.22.33.1

Содержание EFN324

















































































































































































Результаты поиска

Содержание EFN324

Отзывы:

Ericsson EFN324, Руководство пользователя, Страница: 129 / 176

Результаты поиска

Содержание EFN324

Отзывы: