Ericsson EFN324, Руководство пользователя, Страница: 5 / 176

Glossary
1 Introduction
This guide describes how to use the EFN324. It describes its functions,
Command Line Interface (CLI) and use in EDA. This guide is intended for
operation and maintenance personnel.
Some of the EFN324 functions are described in the EDA 1200 System Description .
Reading the System Description before reading this guide is recommended.
Important!
When used with PEM or ServiceOn PEM, most of the EFN324 functions
(including VLANs) are configured automatically by the management
system. Any duplicate configurations created using the Command Line
Interface (CLI) commands described in this manual will be overwritten by
the management system.
Throughout this guide, the EFN324 is also referred to as the EFN and an
Ethernet access switch. These terms are interchangeable.
The guide can be printed on a monochrome printer, but the pictures and
illustrations may be more difficult to understand.
1.1 Revision History
This guide is valid for the EFN324 software released in EDA 4.3. This guide is
also valid for ELN220 running the same software. Other product version with
functions not described in this guide may be available.
1.1.1 This Version (S)
Other than editorial changes, this document has been revised as follows:

Flows section (section 4.11 on page 22) updated with better explanations.

A note added in Table 16 for the statistics command.
1.1.2 Version N
Other than editorial changes, this document has been revised as follows: