Ericsson EFN324 Скачать руководство пользователя страница 151

Страница: 151 / 176

Glossary

All downwards directed traffic must have the gateway as Layer 2 source
address.
Level 2:

switching_rule

IP validation

. Either static or dynamic or both

types of IP addresses define which traffic is let through.
Level 3:

switching_rule =

Virtual MAC

. In addition to the level 1 and 2

functions, the end user’s MAC addresses are also exchanged with internal

MAC addresses selected and controlled by the system.

switching_rule

PPPoE

only packets with Ethertypes 0x8863 and

0x8864 are let through. All other packets are discarded.

If IP validation is selected, and at the same time

max_dynamic_ip_addresses

is set to zero, then static IP addresses must

be defined too. Note that static IP addresses may be defined even if dynamic

IP addresses are allowed. It is suggested that

max_virtual_mac_addresses

is set to

max_dynamic_ip_addresses

plus the number of static IP addresses that are defined.

The

arp_and_dhcp_tag

attribute is used to define a parallel VLAN ID for the

uplink traffic to or from a switching domain (

vlan

). Upstream traffic on the

uplink is tagged according to the ordinary configured VLAN ID in the switching

domain (

vlan

) resource. Downstream traffic from an uplink, marked with this

arp_and_dhcp_tag

VLAN ID tag, is also accepted by this switching domain.

Option_82

makes it possible for system to add specific enduser information

in DHCP messages from endusers so that the DHCP server may include end

user identity in the process that allocates the IP address.

Example:

efn#

set vlan 10 multicast igmp_snooping

13.9

System Configuration

Table 14

System Commands

Command

Description

Page

cli

Set parameters for autologout,
heartbeat and prompt.

148

copy

Copy a configuration file from a server
to the EFN324.

149

Содержание EFN324

















































































































































































Результаты поиска

Содержание EFN324

Отзывы:

Ericsson EFN324, Руководство пользователя, Страница: 151 / 176

Результаты поиска

Содержание EFN324

Отзывы: