Ericsson EFN324 Скачать руководство пользователя страница 120

Страница: 120 / 176

IndexIndex

second_tag <VLANID>/transparent/untagged 

Second VLAN

ID for packets forwarded on this egress connection. Range for VLAN ID is

1 to 4095.e

tags <listofVLANIDs>/untagged/* 

LAN ID’s that are

forwarded on this ingress connection. The list of VLAN IDs is a Range
from 1 to 4095. * will forward all VLAN IDs. Different options may be

combined by comma (,). Range may be given as ID,ID,ID (three vlan IDs)
or IDID (all VLAN IDs between the first and last VLAN IDs). If double

tagged frames are used (

second_tags

is configured), only single VLAN

IDs, * or untagged may be used (not range).

second_tags <VLANID>/untagged 

Second VLAN ID’s that are

forwarded on this ingress connection. Range for each VLAN ID is 1 to

4095.

filter_profile <profile> 

The filter profile to be used.

ip_destinations –

IP destination can be used as a traffic mapping

mechanism, in order to identify a service by its IP destination, for

example, a multicast group address, or a BRAS address. This way it is
possible to send Enduser traffic of different types to different switching

domains even though they have the same VLAN tag or are not tagged at
all.

The following limitations are in effect with respect to the range of IP
addresses:



The first IPAddress must be less than the second IPAddress



The IPAddresses must form a valid network that can be expressed with the /nn
notation

233.0.0.0-
233.0.0.7

OK because this is a valid network (233.0.0.0/29).

233.0.0.0-
233.0.0.8

Not OK since this is not a valid network (end
address is illegal).

233.0.0.1-
233.0.0.7

Not OK since this is not a valid network. Start
address is invalid in combination with this end
address.

Default Settings

bandwidth_limitation: none

broadcast_allowed: yes
description: undefined

ptag: 0

Содержание EFN324

















































































































































































Результаты поиска

Содержание EFN324

Отзывы:

Ericsson EFN324, Руководство пользователя, Страница: 120 / 176

Результаты поиска

Содержание EFN324

Отзывы: