calls. Anytime the PTT button is pressed
and held, the keypad is enabled for DTMF
entry.
METHOD 2: Press
*
to enter the overdial select/en-
try mode and follow the selection mode
rules to call up a stored number from the
phone list or to direct enter the overdial
digits.
turns on. Press PTT to send the
overdial sequence once. If the number
needs to be transmitted again it must be
selected or entered again (this prevents
unwanted numbers from being sent the
next time the PTT button is pressed during
the call).
This overdial select/entry mode remains
active until the call is dropped, cleared, or
M
is pressed. The overdial select/entry
mode can be re-entered if the call is still
active by pressing
*
.
PROGRAMMABLE ENTRIES
Prestoring Individual and Telephone Interconnect
Calls from the Keypad (System Model only)
Individual Call ID numbers, telephone numbers and
other number sequences for overdialing are stored in the
special calls lists when programming the radio. The first
ten entry locations of these lists can be changed by the
radio operator. The keypad is used when adding, chang-
ing and storing numbers in these entry locations.
57
Содержание EDACS PRISM HP/LPE-200
