How to use this device
74/98
–
Remove the two upper low pressure lamps in the canopy so that you can
then access the facial tanner's low pressure lamp starter.
Replacing lamps: see page 69.
Replacing starters: see page 70.
UV high pressure lamps and filter panels: see page 71.
When assembling the device please note:
–
Support the canopy panel with one hand so that it does not fall down.
–
Re-lock the locks: first the lock in the middle, then the outer locks.
–
Remove fingerprints and other soiling carefully.
12.16.9
Cleaning or replacing the lamps and filter
panels in the shoulder tanner
Not applicable for this device.
12.16.10
Cleaning or replacing the interior lights
–
Removing the canopy panel: see page 65.
–
Remove the 2 lamps above and the 2 lamps below the interior lighting.