How to use this device
58/98
12.15
How to clean/disinfect
WARNING!
Infections can be transferred through skin contact.
All items/equipment components, with which the user can
come into contact during tanning, must be cleaned and
disinfected after every tanning session:
–
Protective goggles
–
Acrylic panels
–
Handles and control panel
–
AUX cable
–
Adjustable air nozzles
–
Use only EPA registered quaternary ammonium germi-
cidal based detergent solution (follow product label for
use-dilution), such as Lucasol One Step, to clean and
disinfect the tanning system and its components.
NOTE:
For thorough cleaning and disinfection, the product must be
allowed to remain in contact with the surface being cleaned
and disinfected for a specified amount of time.
This specified amount of time depends on the cleaner/
disinfectant which is used. Follow the directions for use of the
cleaner/disinfectant.
After this specified application time remove remaining clean-
er/disinfectant from the surfaces of the device. Use a single-
pass paper towel.
– Other cleaning agents, especially concentrated
disinfectants
or solvents
(e.g. Lysoform, ethyl alcohol or
other liquids
containing alcohol) must never be used for
cleaning.
Once the remaining cleaner/disinfectant has been removed,
perform a visual inspection for signs of any remaining
cleaning
solution, or areas still soiled. If either are remaining, repeat
the cleaning process until a visual inspection can be
successfully
completed without the need for additional cleaning.
If any of the components listed above cannot be successfully
cleaned and disinfected, they must be replaced.