Erbe ERBOTOM ICC 350 M, Инструкция по эксплуатации

Страница: 27 / 100

4-7
4
AUTO COAG 2 function field
All parameters can be set in this function field and
are relevant to monopolar coagulation:
4.1 Selection of the coagulation mode
By pressing this key, one of the following coagulation modes can be selected:
4.2 Soft coagulation without Auto Stop
4.2.1 Soft coagulation with Auto Stop
4.3
Forced coagulation (Check the version. See Chapter 10.12)
4.4 Spray coagulation (Also suitable for Argon Gas coagulation)
4.5 Power limitation
The HF power output can be limited in 1 watt steps from 120 watts to 1 watt. If the
display 4.6 shows “—“, the Auto Coag 2 mode is switched off.
4.6 Display of the set power limitation in max. watt
4.7 Changeover switch for the blue pedal
If the left signal 4.7.1 is illuminated in this key, the currently selected coagulation mode of the
Auto Coag 2 function field can be activated via the blue pedal of a dual-pedal footswitch.
Activation
The coagulation modes for this AUTO COAG 2 function field can be activated via the blue key
on an electrode handle or via the blue pedal of a footswitch and stopped via this key or this pedal
or automatically (Auto Stop). Activation is visually signaled by continuous illumination of the
triangle symbols in the upper part of the COAGULATION function field as well as acoustically
signaled.