Erbauer ERB596CSW, Оригинальное руководство пользователя

Страница: 8 / 24

is important to support the work properly to minimize body
exposure, blade binding, or loss of control.
e. Hold power tool by insulated gripping surfaces when
performing an operation where the cutting tool may contact
hidden wiring or its own cord.
Contact with a “live” wire will
also make exposed metal parts of the power tool “live” and shock
the operator.
f. When ripping always use a rip fence or straight edge guide.
This improves the accuracy of cut and reduce the chance of
blade binding.
g. Always use blades with correct size and shape (diamond
versus round) of arbor holes.
Blades that do not match the
mounting hardware of the saw will run eccentrically, causing loss
of control.
h. Never use damaged or incorrect blade washers or bolt. The
blade washers and bolt were specially designed for your saw, for
optimum performance and safety of operation.
FURTHER SAFETY INSTRUCTIONS FOR CIRCULAR SAWS
KICKBACK CAUSES AND RELATED WARNINGS
- Kickback is a sudden reaction to a pinched, bound or
misaligned saw blade, causing an uncontrolled saw to lift up
and out of the workpiece toward the operator;
- When the blade is pinched or bound tightly by the kerf closing
down, the blade stalls and the motor reaction drives the unit
rapidly back toward the operator;
- I
f the blade becomes twisted or misaligned in the cut, the teeth
at the back edge of the blade can dig into the top surface of the
wood causing the blade to climb out of the kerf and jump back
toward the operator.
Kickback is the result of saw misuse and/or incorrect operating
procedures or conditions and can be avoided by taking proper
precautions as given below.
a) Maintain a irm grip with both hands on the saw and
position your arms to resist kickback forces. Position
your body to either side of the blade, but not in line with
the blade.
Kickback could cause the saw to jump backwards,
but kickback forces can be controlled by the operator, if proper