Erbauer ERB596CSW, Оригинальное руководство пользователя

Страница: 17 / 24

2000W 235mm CIRCULAR SAW ERB596CSW
OPERATING INSTRUCTIONS
NOTE:
Before using the tool, read the
instruction book carefully.
INTENDED USE
The machine is intended for ripping and cross-
cutting wood in straight cutting lines and with bevel
angles to 50°, while resting irmly on the work
piece.
HOW TO ASSEMBLE YOUR SAW BLADE (See
Fig. 1-1, 1-2, 1-3)
Your circular saw has been shipped completely
assembled, except for the blade, which is packed
unassembled. Before itting you must inspect the
saw blade carefully to make sure that no breakage
or damage has occurred during shipping.
1) The saw has a spindle lock button (17) for
locking the spindle. Push and hold the spindle
lock button when mounting the blade or
adjusting the blade bolt.
2) Use the Hex key (20) to loosen the blade bolt
(21) by turning it in a counterclockwise direction.
3) Completely remove blade bolt (21) and remove
outer lange (22).The part remaining is the inner
lange (23) and does not need to be removed.
4) Rotate the lower guard using the lower guard
lever (13) and hold it in the raised position to
allow the saw blade (11) to be located onto the
spindle and against the inner lange (23).
5) Reit the outer lange (22) and whilst holding
down the spindle lock button (17) you can
reit the blade bolt (21) and hand tighten in a
clockwise direction.
6) Finally, use the Hex key (20) and spindle lock
button (17) to securely tighten the blade bolt
with 1⁄4 turn more than inger tight.
WARNING: Saw blade teeth are very sharp.
Wear gloves for protection.
DUST EXTRACTION OUTLET (See Fig. 2)
To remove sawdust, connect a suitable external
dust extraction machine (e.g. vacuum cleaner) to
the dust extraction outlet using a dust tube (15)
vacuum adapter and a lexible hose connection.
Ensure the adapter is secured with two screws.
Fig. 1-1
Fig. 1-2
Fig. 1-3
24
23
22 21 20
11
Fig. 2