Erbauer ERB596CSW, Оригинальное руководство пользователя

Страница: 20 / 24

WORKING HINTS FOR YOUR CIRCULAR SAW
If your power tool becomes too hot, run no load
for 2-3 minutes to cool the motor. Avoid prolonged
usage at very low speeds. Always use a blade
suited to the material and material thickness to be
cut. The quality of cut will improve as the number
of blade teeth increases. Always ensure that the
work-piece is irmly held or clamped to prevent
movement. Support large panels close to the cut
line. Any movement of the material may affect the
quality of the cut. The blade cuts on the upward
stroke and may chip the uppermost surface or
edges of your work piece. When cutting, ensure
your uppermost surface is a non- visible surface
when your work is inished.
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your power tool requires no additional lubrication
or maintenance. There are no user serviceable
parts in your power tool. Never use water or
chemical cleaners to clean your power tool. Wipe
clean with a dry cloth. Always store your power
tool in a dry place. Keep the motor ventilation
slots clean. Keep all working controls free of
dust. Occasionally you may see sparks through
the ventilation slots. This is normal and will not
damage your power tool.
If the supply cord is damaged, it must be replaced
by the manufacturer, its service agent or similarly
qualiied persons in order to avoid a hazard.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
Local Authority or retailer for recycling advice. For
further information visit www.recycle-more.co.uk.