Erbauer EDD12-Li-2, Оригинальное руководство пользователя

Страница: 23 / 37

15 14
ASSEMBLY
01
SYMBOLS
Read the instruction manual
Wear eye protection
Wear hearing protection.
Wear a dust mask.
Do not dispose of battery packs in fire. They will explode and cause injury.
Do not dispose of battery packs in rivers or immerse in water.
Do not expose battery packs to heat in excess of 40°C
yyWxx
Manufacturing date code: Year of manufacturing (20yy) and week of
manufacturing (Wxx)
02
UNPACKING
Unpack all parts and lay them on a flat, stable surface.
• Remove all packing materials and shipping devices, if applicable.
• Make sure the delivery contents are complete and free of any damage. If you find that parts
are missing or show damage do not use the product but contact your dealer. Using an
incomplete or damaged product represents a hazard to people and property.
• Ensure that you have all the accessories and tools needed for assembly and operation. This
also includes suitable personal protective equipment
WARNING!
The product and the packaging are not children’s toys!
Children must not play with plastic bags, sheets and small parts! There is a
danger of choking and suffocation!
03
ASSEMBLING THE MACHINE
CHARGING YOUR BATTERY PACK
The battery has been shipped in a low charge condition. Charge it fully before first use.
Refer to the charger instruction manual for the details.
TO REMOVE OR INSTALL THE BATTERY PACK (A1, A2)
Depress the battery pack release button to release and slide the battery pack out from
your tool. After recharge, slide it back into your tool. A simple push and slight pressure will
be sufficient.
BATTERY PACK POWER BAR
The Li-Ion battery pack (6) is equipped with a POWER BAR which is used to give an
indication of the battery pack’s remaining charge. Press and hold the POWER BAR
button (7) to check battery charge as below.
6 7
76-100% Charge
51-75% Charge
26-50% Charge
15-25% Charge
On Off
INSERTING OR REMOVING, SOCKET OR SCREWDRIVER BIT (B)
Pull the locking sleeve(2) forward. Fully insert the desired bit into the tool holder and
release the locking sleeve.Pull bit forward to ensure correct fitting.
To remove, pull the locking sleeve(2) forward and remove the bit.