1. Release the spray gun trigger (15) and lock it.
2. Relieve the pressure using the “Pressure Release Procedure”.
3. Rotate the reversible nozzle through 180 degrees so that the arrow is pointing
toward the rear of the gun and secure it in place.
4. Select the Prime/Spray lever (3) to the spray position.
5. Switch the sprayer on using the on/off switch (23).
6. Operate the trigger (15), directing the spray into a waste container until the spray
emerges in a single and high pressure stream.
7. Release the trigger (15) and reset the reversible nozzle to the spray position, once
the pressure has been released.
8. Spraying can now continue.
After use
01
Pressure release procedure (Fig. L)
WARNING!
Be sure to follow the pressure release procedure when
shutting the airless paint sprayer down for any purpose, including
cleaning or adjusting.
1. Switch the product off, disconnect it from the power supply and let it cool down.
2. Put the Prime/Spray lever (3) to the prime mode.
3. Squeeze the trigger (15) to release remaining pressure in spray gun (14).
4. Lock the trigger (15).
5. Check, clean and store the airless paint sprayer as described below.
MNL_Erbauer_GB_EAPS600_600W Airless Paint Sprayer_V1_201029.indd 37
10/29/20 3:31 PM
38
