DANGER!
Injection Hazard. Engage trigger lock (13) before removing.
3. Observe the warning statement on the spray tip. Ensure that the trigger lock (13)
is engaged, the tool is set to the "Prime" mode and the tool is switched off before
removing or adjusting.
06
Trigger lock (Fig. K)
WARNING!
Always lock the trigger (15) when not spraying.
Turn the trigger lock (13) according to your need.
1. Lock the trigger: Rotate backward and engage the trigger lock (13) and ensure that
the trigger (15) can’t be pressed down.
2. Unlock the trigger: Rotate forward and disengage the trigger lock (13) to a position
that the trigger (15) can be pressed freely.
3. Lock the spray gun: Squeeze the trigger (15) slightly, then rotate the trigger safety
lock (13) forward until the trigger (15) is locked.
WARNING!
Never lock the spray gun during cleaning and maintenance.
Risk of injection from the spray nozzle (14f) in spraying operation with
high pressure.
07
Valve clearance button
A steel ball is seated inside the inlet valve (5). If the paint sprayer is stored for a long
time or not properly cleaned, the steel ball may stick in the inlet valve (5), resulting in
poor liquid feed or the tool not working correctly.
Press the valve clearance button (5a) intermittently with the thumb to knock the internal
steel ball until the steel ball inside of the inlet valve (5) is released.
MNL_Erbauer_GB_EAPS600_600W Airless Paint Sprayer_V1_201029.indd 32
10/29/20 3:31 PM
33
