Erbauer 5059340010762, Оригинальное руководство пользователя

Страница: 34 / 44

34
Storage
1. Switch the product off and remove the battery pack.
2. Clean the product as described above.
3. Store the product and its accessories in a dark, dry, frost-free, well-ventilated
place.
4. Always store the product in a place that is inaccessible to children. The ideal
storage temperature is between 10 °C and 30 °C.
5. We recommend using the original package for storage or covering the product with
a suitable cloth or enclosure to protect it against dust.
Troubleshooting
Suspected malfunctions are often due to causes that the users can fix themselves.
Therefore check the product using this section. In most cases the problem can be
solved quickly.
WARNING! Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed
by an authorised service centre or a similarly qualified specialist if you
cannot solve the problem yourself!
Problem Possible cause Solution
1. Product does
not start
1.1. Forward / reverse rotation
control switch at centre lock
position
1.2. Battery pack not properly
attached
1.3. Battery pack discharged
1.4. Battery pack damaged
1.5. Other electrical defect to
the product
1.1. Push forward / reverse
rotation control switch to
left / right
1.2. Attach properly
1.3. Remove and charge
battery pack
1.4. Check by a specialist
electrician
1.5. Check by a specialist
electrician
2. Product does
not reach full
power
2.1. Battery pack capacity too
low
2.2. Air vents are blocked
2.3. Incorrect torque ring setting
2.1. Charge battery pack
2.2. Clean the air vents
2.3. Choose higher torque ring
setting
MNL_Erbauer_ECD12-Li-2_GB_12V Combi Drill_V10_210422.indd 34 4/22/21 6:20 PM