Erbauer 5059340010762, Оригинальное руководство пользователя

Страница: 35 / 44

35
Problem Possible cause Solution
3. Unsatisfactory
result
3.1. Drill / driver bit is worn
3.2. Drill / driver bit not suitable
for intended operation
3.1. Replace with a new one
3.2. Use suitable drill / driver
bit
4. Product
suddenly
stops
4.1. Product overloaded
4.2. Battery pack discharged
4.3. Battery too hot
4.1. Remove the product from
the workpiece and switch
it on again
4.2. Remove and charge
battery pack
4.3. Remove battery pack and
let it cool down
5. Excessive
vibration or
noise
5.1. Drill bit is dull / damaged 5.1 Replace with a new one
Recycling and disposal
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist.
Check with your local authority or local store for recycling advice.
For further information visit www.recycle-more.co.uk.
Disposal of an exhausted battery pack
To preserve natural resources, please recycle or dispose of the battery pack
properly. Consult your local waste authority for information regarding available
recycling and / or disposal options.
Discharge your battery pack by operating your tool, then remove the battery
pack from the tool and cover the battery pack connections with heavy duty
adhesive tape to prevent short circuit and energy discharge.
Do not attempt to open or remove any of the components.
MNL_Erbauer_ECD12-Li-2_GB_12V Combi Drill_V10_210422.indd 35 4/22/21 6:20 PM