Erbauer 5059340010762, Оригинальное руководство пользователя

Страница: 33 / 44

33
Care & maintenance
WARNING! Always switch the product off, remove the battery back and
let the product cool down before performing inspection, maintenance and
cleaning work!
Only perform care and maintenance work according to these instructions!
All further works must be performed by a qualified specialist!
Clean
1. Clean the product with a dry cloth. Use a brush for areas that are hard to reach.
2. In particular clean the switches and air vents after every use with a cloth and brush.
3. Remove stubborn dust with high pressure air (max. 3 bar).
4. Check for worn or damaged parts. Replace worn parts as necessary or contact an
authorised service centre for repair before using the product again.
Do not use chemical, alkaline, abrasive or other aggressive detergents or
disinfectants to clean this product as they might be harmful to its surfaces.
Maintenance
Your tool requires no additional lubrication or maintenance. There are no user
serviceable parts in your tool.
Transportation
1. Switch the product off and remove the battery pack.
2. Protect the product from any heavy impact or strong vibrations which may occur
during transportation in vehicles.
3. Secure the product to prevent it from slipping or falling over.
MNL_Erbauer_ECD12-Li-2_GB_12V Combi Drill_V10_210422.indd 33 4/22/21 6:20 PM