Erbauer 5059340010762, Оригинальное руководство пользователя

Страница: 27 / 44

27
Use
Intended use
This product is intended for drilling in wood and similar materials e.g. MDF, plywood,
plastic, metal and impact drilling in brick and concrete, as well as for screw driving. It
should not be used for working on materials that are dangerous to health.
For safety reasons it is essential to read the entire instruction manual before first
operation and to observe all the instructions therein.
This product must not be used for any purposes other than those described.
Before you start
01
Protection
Controls
01
Switching On/Off
Ensure the forward / reverse rotation control (6) is not on centre lock position.
1. Switch the product on by pressing the On/Off switch (12) (Fig. J).
2. Switch the product off by releasing the On/Off switch (12).
The On/Off switch (12) is fitted with a brake function which stops your chuck
immediately when you quickly release the switch.
The ON/OFF switch (12) is fitted with a built-in speed control. The speed is controlled
by how far the trigger switch is pressed.
02
Switch lock
The switch trigger can be locked at the OFF position. This helps to reduce the
possibility of accidental starting when not in use.
Move the forward / reverse rotation control (6) to the centre position to lock the On/Off
switch (12) and avoid accidental starting (Fig. K).
MNL_Erbauer_ECD12-Li-2_GB_12V Combi Drill_V10_210422.indd 27 4/22/21 6:20 PM