Equator EZ 2512 CEE Скачать руководство пользователя

Страница: 18 / 20

Too m

oo m

oo muc

uch f

h f

h foam.

oam.

Is the detergent appropriate

Is the detergent appropriate
for machine washing?

for machine washing?

for machine washing? Check
whether the definition on its
label reads “for machine wash”
or “hand and machine wash”,
or any other similar wording.

Is the correct amount being

Is the correct amount being
used?

used?

used? An excessive amount of
detergent, besides producing
too much foam, does not
guarantee a more effective
wash, and causes scaling in the
internal parts of the appliance.

The washer-dryer

does not dr

does not dry

y.....

Check whether:

the plug has been correctly
inserted into the socket; there
is electricity in your home; the
appliance door has been shut
properly; a delayed start (if
available) has not been
selected; program knob A

has been set to Reset

Reset

Reset and

the drying cycle knob B

B has

been set to position
0 minutes

0 minutes

0 minutes.

The washer-dryer doesn't

The washer-dryer doesn't
dr

dry pr

y pr

y properl

operl

operly

y.....

Check whether:

1) the end of the drain hose
is underwater; 2)

2) the drain

pump is obstructed; 3)

3) the

advice given on the maxi-
mum loads has been taken;
4)

4) the water tap has been
turned on.

If, despite all checks, the
washer-dryer fails to function
and the problem persists, call
your nearest authorized
Customer Service Centre,
providing the following
information:

----- the nature of malfunction

the nature of malfunction

----- the model type no. (Mod. ....)

the model type no. (Mod. ....)

- the serial number (S/N ....)

This information can be found
on the data plate situated at the
back of the washer-dryer.

Is there space between the

Is there space between the
machine and adjacent

machine and adjacent

machine and adjacent
units?

units?

units? If it is not a built-in
model, the washer-dryer will
oscillate a bit during the spin
cycle. A few cm of space
should therefore be left
around it.

The washer-dryer

leaks.

Is the metal ring of the inlet

Is the metal ring of the inlet
hose properly attached?

hose properly attached?

hose properly attached?
Turn off the water supply,
unplug the appliance and try
tightening its attachment
without forcing it.

Is the detergent dispenser

Is the detergent dispenser
obstructed?

obstructed?

obstructed? Remove and
wash it under tap water.

Is the drain hose well

Is the drain hose well
attached?

attached?

attached? Turn off the water
supply, unplug the
appliance and try tightening
its attachment.

Is the drain hose kinked?

Is the drain hose kinked?
The drain hose must be as
straight as possible. Make
sure the drain hose is not
crimped or kinked.

Is the washer-dryer’s drain

Is the washer-dryer’s drain
hose clogged?

hose clogged?

hose clogged? Is there an
extension of the drain hose?
If so, is it positioned
incorrectly, blocking the
water flow?

Excessive vibration

Excessive vibration
during the spin cycle.

during the spin cycle.

Have all shipping bolts

Have all shipping bolts
been removed during

been removed during

been removed during
installation?

installation?

installation? See the
following page on
installation procedures.

Has the washer-dryer been

Has the washer-dryer been
levelled correctly?

levelled correctly?

levelled correctly? The
levelling of the appliance
should be checked
periodically. Adjust the feet
and check them with a level.

The washer-dryer

does not drain or

spin.

Does the selected program

Does the selected program
incorporate water drai-

incorporate water drai-

incorporate water drai-
ning?

ning?

ning? Some programs stop
at the end of the wash cycle
and draining will have to be
selected manually.

Is the “Easy iron" function

Is the “Easy iron" function
-where provided - enabled?

-where provided - enabled?

-where provided - enabled?
This function requires
manual selection for
draining.

Is the drain pump clogged?

Is the drain pump clogged?
To check it, turn off the water
supply, unplug the washer-
dryer and follow the
instructions on page 18, or
call technical support.

Always get

assistance from

authorized service

agent and always

insist on original

spare parts.

Remove
filters
clean and
replace

Tape

Instructions for installation and use

Cleaning Filters

Drain: to avoid flooding
be careful to the adjust the
drain hose to at least
25” above the base
of the appliance.
Fasten the hoses securely.

Remove filters
using tweezers,
clean and replace