Equalizer International SWi12/14TM, Инструкция оператора

Страница: 3 / 40

OPERATOR INSTRUCTION MANUAL
IM_SWi_REV07_A4_English
SWi12/14TM; SWi20/25TE; SWi20/25TI
FLANGE SPREADING WEDGES
3
2.
TOOL SAFETY
2.1
GENERAL SAFETY
These instructions cover the safe operation and
maintenance of THE EQUALIZER
SWi12/14TM ,
SWi20/25TE and SWi20/25TI FLANGE SPREADING
WEDGE tools. The use of these tools should be as part
of a broader task-based risk assessment, which should be
carried out by the operation supervisor or other competent
person.
Failure to comply with the safety information contained
within this manual could result in personal injury or
equipment damage. Read all instructions, warnings and
cautions carefully, and follow all safety precautions.
The safety of the operator, any assisting personnel and
the general public is of paramount importance. Always
work in accordance with applicable national, local, site &
company-wide safety procedures.
2.2
PERSONNEL COMPETENCY
Only personnel deemed competent in the use of mechanical
and hydraulic equipment should use these tools.
2.3
DISCLAIMER
Equalizer cannot be held responsible for injury or damage
resulting from unsafe product use, lack of maintenance
or incorrect product and/or system operation. If in doubt
as to the safety precautions and applications, contact
Equalizer using the contact details at the back of this
manual.
1.
INTRODUCTION
The Equalizer™ SWi Innovative Range of Flange
Spreading Wedge tools has been developed to assist in
WKH VSUHDGLQJ RI DOO ÀDQJH MRLQW W\SHV ZLWK D PLQLPXP
access gap of 6.0mm (0.24”). The tools can be used
during pipework construction, commissioning or during
routine maintenance.
7KH6:LWRROVKDYHOHVVPRYLQJSDUWVDQGQR¿QJHUSLQFK
points. The tools have been developed to increase the
spreading distance on each step while gaining easier
access between any remaining stud-bolts within the
ÀDQJHMRLQW7KHWRROVSURYLGHDPXFKKLJKHUVSUHDGLQJ
IRUFH WKDQ WKH H[LVWLQJ 6: ÀDQJH VSUHDGLQJ WRROV 7KH
SWi tools are supplied with a swivel handle, safety lanyard
and stepped block attachment as standard.
It is essential that the user familiarises themselves with
the contents of this manual prior to using the tool.
This manual contains information for the following tools:
‡ SWi12/14TM Mechanical Flange Spreading Wedge
‡ SWi20/25TI Integral Hydraulic Flange Spreading
Wedge
‡ SWi20/25TE External Hydraulic Flange Spreading
Wedge