Equalizer International SWi12/14TM, Инструкция оператора

Страница: 12 / 40

OPERATOR INSTRUCTION MANUAL
IM_SWi_REV07_A4_English
SWi12/14TM; SWi20/25TE; SWi20/25TI
FLANGE SPREADING WEDGES
12
5.2
SWi12/14TM TOOL FUNCTION
MECHANICAL TOOL OPERATION
The SWi12/14TM Spreading Wedge uses mechanical
torque to advance the wedge and spread the jaws. The
torque is applied using the supplied Torque Wrench,
enabling accurate control of the force applied.
TORQUE WRENCH USAGE
Holding the Torque Wrench in one hand, unlock the
knurled handle by turning the locking knob anti-clockwise.
Select the torque setting by turning the knurled handle
until the required torque value is indicated.
For example, to set the Torque Wrench to 46Nm: turn the
NQXUOHG KDQGOH XQWLO WKH RQ WKH ¿QH VFDOH DOLJQV ZLWK
40Nm on base scale; now turn slightly further until the 6
RQWKH¿QHVFDOHDOLJQVZLWKWKHFHQWUDOOLQH
Setting an imperial torque (in ft.lb) is done in exactly the
same way.
Lock the handle by turning the locking knob clockwise.
Install the supplied socket onto the Torque Wrench and
attach to the tool.
Slowly and smoothly pull the handle, gradually applying
more force until you feel or hear the Torque Wrench click,
indicating that the selected torque has been achieved. Do
not continue to apply force after the Torque Wrench has
clicked. Special care should be taken when using low
torque settings.
5.
SWi12/14TM
MECHANICAL FLANGE
SPREADING WEDGE
The SWi12/14TM Spreading Wedge uses mechanical
torque to advance the wedge and spread the jaws.
5.1
SWi12/14TM TOOL CAPABILITIES
SPREADING FORCE
Maximum SWL torque of 175N.m (130ft.lb) will generate
12T (120kN) spreading force on the 1st step and 14T
(140kN) spreading force on the 4th step.