USB I/F Timeout Setting:
Specify the length of time in seconds that must elapse before ending USB communication with a
computer after the printer receives a print job from a PostScript printer driver or PCL printer driver.
If the job ending is not clearly defined from a PostScript printer driver or PCL printer driver, it can
cause endless USB communication. When this occurs, the printer ends communication after the
specified time has elapsed. Enter 0 (zero) if you do not want to end communication.
Related Information
&
&
“Printing JPEG Files from a Memory Device” on page 82
&
“Printing PDF or TIFF Files from a Memory Device” on page 83
Menu Options for Network Settings in General Settings
Wi-Fi Setup:
Set up or change wireless network settings. Choose the connection method from the following and then
follow the instructions on the LCD panel.
❏
Router
❏
Wi-Fi Direct
Wired LAN Setup:
Set up or change a network connection that uses a LAN cable and router. When this is being used, Wi-
Fi connections are disabled.
Network Status:
Displays or prints the current network settings.
Connection Check:
Checks the current network connection and prints a report. If there are any problems with the
connection, see the report to solve the problem.
Advanced:
Make the following detailed settings.
❏
Device Name
❏
TCP/IP
❏
Proxy Server
❏
Email Server
❏
IPv6 Address
❏
MS Network Sharing
❏
NFC
❏
Link Speed & Duplex
❏
Redirect HTTP to HTTPS
❏
Disable IPsec/IP Filtering
User's Guide
Preparing the Printer
42