Epson WF-C20590 Series, Руководство пользователя

Страница: 261 / 403

261
4. Do one of the following to select fax recipients:
• Select Direct Enter , enter a fax number, and select OK . To add another fax number, repeat these
steps.
Note: If direct dialing has been restricted, you can only select the number from the contact list or
fax history. If necessary, enter an outside line access code (such as 9) at the beginning of the fax
number. If the access code has been set up in the
Line Type setting, enter the # pound sign
instead of the code. If your fax number requires a brief pause, select the icon to insert a pause
symbol (–).
• Select the Recipient tab to display the contact list. Select the checkbox next to one or more
contact (select the checkbox again to deselect it). You can also select the Search field to search
for recipients by name, index name, or entry number. Select Close when you finish.
Note: To delete selected recipients, select the Enter Recipient field, select the recipient you want to
delete, and select Remove .
5. If you need to change any fax settings, select the Fax Settings tab and select your settings.
6. If you want to preview your fax in black-and-white on the LCD screen, select Preview . (If the preview
looks incorrect, select Retry , reposition the document or change the fax settings, and repeat this
step.)
Note: If you do not touch the preview screen for 20 seconds, your product sends the fax
automatically. You cannot preview images when the Direct Send setting is turned on.
7. If you want to save your fax settings for later use, select Presets and add a new entry.
8. Select Send .
Note: To cancel faxing, check the job status by selecting Job/Status .
Your product scans your original and prompts you to place additional pages, if necessary.
After scanning your originals, your product dials the number and sends the fax.
Note: Your product does not save sent color faxes to its memory. If the Save Failure Data setting is
enabled, faxes that failed to be sent are stored to the product's memory and you can resend them from
the Status Menu screen.