2-2
Installation Rev.
B
Confidential
Package Contents
The following items should be included in the UB-S09 package:
❏
UB-S09
❏
User’s Manual
Jumper Settings
The UB-S09 has two jumpers: JP1 and JP2. JP1 selects the customer display connection, and JP2
selects the function* of pin 6 (DSR) of the serial connector.
(*) Refer to Printer Reset in Chapter 3 for a description of the functions of pin 6 (DSR) of the serial connector.
The jumper settings are described below.
Jumper JP1 Settings
As shipped from the factory, pins 2 and 3 of JP1 are shorted.
Note:
Do not set JP1 open (without jumper). If you short pins other than 1 and 2 or 2 and 3 of JP1, the UB-S09
will not operate correctly.
Table 2-1 Customer display connection settings
JP 1
1-2 shorted
2-3 shorted
Customer display connection
settings
Customer display connected
Customer display not connected
3
2
1
3
2
1
Содержание UB-S09
