Epson TP3 Скачать руководство пользователя страница 36

Страница: 36 / 96

Functions & Installation 8. USB Port

RC700-A option TP3 Rev.8

8. USB Port

Connect a commercial USB flash drive to the TP3 memory port to use the following
features.

Backup Controller information to a USB flash drive.
(Refer:

Operation 5.2.1 Backup

)

Restore Controller information from a USB flash drive.
(Refer:

Operation 5.2.2 Restore

)

Updating the software (Refer to:

Operation 5.3.3 Update Software)

8.1 Cautions when using USB flash drive

Although the port is a universal USB port, never connect anything other than a USB
flash drive.

Insert a USB flash drive directly into the TP3 memory port.
Operation is not guaranteed when there are cables or hubs between TP3 and a USB
flash drive.

Insert and remove a USB flash drive slowly and surely.

Do not edit the saved files by the editor.
Operation of the robot system after data restoration is not guaranteed.

Do not use two USB flash drives at once.

8.1.1 Available USB Flash Drive

Use a USB flash drive that meets the following conditions.

USB2.0 supported

Without security function
USB flash drive with password input function cannot be used.

9. Warning Sound (Beep)

The Teach Pendant beeps when the robot passes the singularity.

Содержание TP3
































































































Результаты поиска

Содержание TP3

Отзывы:

Epson TP3, Руководство пользователя, Страница: 36 / 96

Результаты поиска

Содержание TP3

Отзывы: