Chapter 1 Product Overview
27
1
Printing and Cutting Positions
Paper Specifications
The values above may vary slightly as a result of paper slack or variations in the paper.
Take the notice into account when setting the cutting position of the autocutter.
Paper type
Specified thermal paper
Form
Roll paper
Size
Roll paper diameter
83 mm {3.27
"
} maximum
Roll paper spool
Inside: 12 mm {0.47
"
}, Outside: 18 mm {0.71
"
}
Take-up roll paper width
80 + 0.5/-1.0 mm
Paper width
79.5 ± 0.5 mm
Specified roll paper type
NTP080-80
In U.S.A.: Nakagawa Mfg. (USA) Inc.
In Europe: Nakagawa Mfg. (Europe) GmbH
In Southeast Asia: N.A.K. Mfg. (Malaysia) SDN BHD
(Original paper: TF50KS-E Nippon Paper Industries Co., Ltd.Åj
•
Paper must not be pasted to the roll paper spool.
•
The remaining amount of the roll paper when a roll paper near-end is detected differs
depending on the spool type.
Autocutter blade position
Approx. 29
Approx. 15
Manual-cutter position
Center of the print dotline
[units: mm (All the numeric values are typical.)]
Paper feed direction
Printable area
Last line of
a previous receipt
