Chapter 2 Setup
41
2
Selecting the Print Density (DIP Switch 2-3/2-4)
Function
SW 2-3
SW2-4
Low power consumption mode
ON
ON
Print density (Standard)
OFF
OFF
Print density (Darker than standard)
ON
OFF
Print density (Dark)
OFF
ON
•
If the print density is set to “Darker than standard” or ”Dark” level, printing speed may be
reduced.
•
The print density can be set with DIP switches (2-3/2-4) or to the customized value. (See
"Setting the Memory Switches" on page 43
.) The initial setting of the customized value is
“Depends on the DIP switch settings.” If the customized value is changed, the value set
with the customized value is enabled.
