105
Appendix A Product Specifications
Paper Specifications
Roll Paper
Paper type
Thermal paper
Size
Roll diameter
Ø83 mm maximum
Core
Inner diameter: Ø12 mm
Outer diameter: Ø18 mm
Width: Same as the paper width, or within 1 mm of the paper width
Take-up width
80 + 0.5 / - 1.0 mm
Paper width
79.5 ± 0.5 mm
Original paper type
NTP080-80 [Original paper type: TF50KS-E Nippon Paper Industries
Co., Ltd.]
Japan: Nakagawa Mfg. Co., Ltd.
North America: Nakagawa Mfg. (USA), Inc.
Europe: Nakagawa Mfg. (EUROPE), GmbH.
Southeast Asia: N.A.K. Mfg. (Malaysia) SDN BHD
Specified original paper type
TF50KS-EY, TF60KS-E (NIPPON Paper Industries Co., Ltd.)
PD160R, PD190R (Oji Imaging Media Co., Ltd.)
P220AGB-1 (Mitsubishi Paper Mills Limited)
AP45KS-ND, AP50KS-ND (Jujo Thermal Oy)
KT55FA, KT48FA (Papierfabrik August Koehler SE)
P30521, P30523, P31523, P35524 (Kanzaki Specialty Papers)
•
Use of roll paper whose end is glued to the core is prohibited.
•
Use of thermal paper with a pre-printed recording surface should be avoided. Using it can cause
the thermal head to stick to the thermal paper surface during printing, and cause printing fail-
ure and other problems. The pre-printing also can result in reduced print density. Using thermal
paper with a pre-printed recording surface, pre-printing should be done in accordance with the
conditions (ink type, printing and other conditions) recommended by the paper manufacturer,
and the thermal paper should be checked to ensure that there is no faulty printing, loss of print
density, or other problems.
