156
Advanced Media Setting
menu (in the
Roll Paper
menu)
Setting
Options
Description
Platen Gap
1.2
1.6
2.1
Adjusts the distance between the print head
and the paper; displayed when
Custom
Paper
is selected as the
Paper Type
setting
Top/Bottom Margins
Standard
Top 3 mm/Bottom 3
mm
Top 15 mm/Bottom 15
mm
Top 35 mm/Bottom 15
mm
The
Standard
margins are as follows for the
top and bottom:
• CAD/line drawings: 3 mm
• Other: 30 mm
Select a different value as necessary.
Note:
Left and right margins are always 3
mm.
Paper Suction
-4 to +3
Select this to adjust the distance between the
paper and the print head. Choose lower
values for thinner papers.
Back Tension
Auto
Standard
High
Extra High
Select
High
or
Extra High
if paper wrinkles
during printing
Note:
If the paper still wrinkles when you
select
High
, select
Extra High
and then
change the level of suction by adjusting the
Settings
>
General Settings
>
Printer
Settings
>
Paper Source Settings
>
Roll
Paper Setup
>
Back Tension 2
setting.
Drying Time
Drying Time per Pass
Select from 0 to 10 seconds for the amount of
time the print head pauses to allow drying
after each pass
Drying Time per Page
Select from 0 to 60 minutes for the amount of
time the printer pauses to allow drying after
each page is printed
Содержание SureColor T3470
