Epson SureColor F9370 Скачать руководство пользователя страница 21

Страница: 21 / 197

Handling Media

Follow these guidelines as you handle or store media:

• Read and follow the guidelines provided with each type of media.

• Do not fold the media or otherwise damage its printable surface.

• Do not touch the printable surface. This prevents oil from your hands from causing print quality

problems.

• When handling media, hold it by both edges, preferably while wearing cotton gloves.

• Keep the media dry and avoid storage locations subject to direct sunlight, excessive heat, and high

humidity.

• Retain the media packaging materials so you can use it to store unused media.

• After printing, do not touch, rub, or scratch the printed surface to avoid removing the ink.

• Dry printed media completely before folding or stacking it, or the printed surface may be damaged.

• Keep printed media out of direct sunlight.

• Display and store printed media as instructed in the media documentation.

• When you are not printing on media, remove it from the printer and place it in its original packaging to

prevent deterioration.

Parent topic:

Printer Usage Guidelines

Storing Your Printer

Follow these guidelines if you need to store your printer for a long period:

• If the printer is not used for an extended period of time with the power off, clean the print head nozzles.

Turn the printer on at least once every two weeks to automatically clean the print head and prevent the
nozzles from clogging. If you do not turn on the printer for a long time, the printer may malfunction.

• If you will not use the printer for more than two weeks, maintenance must be performed by a service

engineer before and after this period. Contact Epson support.

• Even if the printer is not turned on, ink that has accumulated in the waste ink tube may leak out. Make

sure the waste ink bottle is installed even when the printer is not on.

• Remove any loaded media before storing the printer to prevent the pressure rollers from causing

creases in the media, which may cause jams or damage to the print head.

• Make sure that the print head is in the home position before storing the printer. If it is left away from the

home position for a long time, the print quality may decline.

Содержание SureColor F9370






































































































































































































Результаты поиска

Содержание SureColor F9370

Отзывы:

Похожие инструкции для SureColor F9370

Бренды по названию

Популярные бренды

Epson SureColor F9370, Руководство пользователя

Результаты поиска

Содержание SureColor F9370

Отзывы:

Похожие инструкции для SureColor F9370

Бренды по названию

Популярные бренды