Epson Stylus Pro 10000 Series, Руководство по обслуживанию

Страница: 44 / 323

EPSON Stylus Pro 10000/10000CF Revision B
Product Description SelecType Settings 44
1.6.1 Printer Setting Menu
Notes:
* The printed image is the same size whether the margin is 15mm or 3mm. The difference is
12mm of paper clearance is added to the top and bottom edges to make paper feeding more
stable and to prevent the paper from rubbing the printheads.
The underlined item equals the default.
o
Platen gap
You can adjust the platen gap using this option.
o
Roll paper margin
T/B 15MM = the printed image is the same size whether the margin is 15mm or 3mm.
The difference is 12mm of paper clearance is added to the top and bottom edges to
make paper feeding more stable and to prevent the paper from rubbing the printheads.
If the print area is greater than the width of the printable area of the paper, the printer
ignores the extra print data on the right side of the paper.
o
Paper size check
You can disable the paper size check to prevent “RELOAD PAPER” errors which may
occur when using very thin paper or paper with low reflective qualities such as tracing
paper.
The print area is determined manually, and the printheads will fire ink onto the platen
if the print area is set larger than the actual paper size.
Table 1-29. Printer Setting Menu
Display Message Options Notes
PLATEN GAP
Auto,
Wide, Narrow
Adjusts the platen gap. (Normally, leave set to
Auto.)
PAGE LINE
ON
OFF
When Auto Cut Off is selected on the operating
Panel, this setting determines whether a line for
manual cutting is printed.
INTERFACE
Auto,Parallel,USB,Op
tion1,Option2
Determines which interface the printer checks
for data. Auto continuously checks all interfaces
and is good for normal use.
PARA. I/F
Compat
ECP
Determines the data transfer rate when using
this interface.(Normally, leave set to
Compatible.)
IEEE1284.4
ON
OFF
IEEE1284.4
CODE PAGE
PC437
PC850
Character code setting. (PC437: expanded
graphics/PC850: multi-lingual)
ROLL MARG
T/B 15MM
15MM
3MM
Roll sheet margin setting.
• Top/Bottom 15mm*
top and bottom margins = 15mm
left and right margins = 3mm
• 15mm: all margins = 15mm
• 3mm all margins = 3mm
PAPER SIZE CHK
ON
OFF
Determines whether the paper size check is
enabled
PAPER ALIGN CHK
ON
OFF
Determines whether the paper skew check is
enabled
INIT. PANEL Exec.
Initializes operating Panel setup values to their
defaults
AUTO NOZZLE
CHK.
PAGE, PASS, OFF
(TBD)
Auto nozzle check
AUTO CLEANING ON, OFF Auto cleaning