manualshive.com logo in svg

Epson Stylus Color C60, Руководство по обслуживанию

Принтер Epson Stylus Color C60 - это устройство с высокими техническими характеристиками. Вы можете скачать бесплатное руководство по эксплуатации с подробными спецификациями на manualshive.com. Узнайте все особенности этого принтера и настройте его по вашему вкусу. Будьте уверены в своем выборе благодаря нашему мануалу.

Поделиться
Скачать
background image

EPSON Stylus C50/C60/C61/C62

Revision C

Disassembly and Assembly

Overview

86

4.1  Overview

This section describes procedures for disassembling the main components of the Stylus 
C50/C60/C61/C62. Unless otherwise specified, disassembly units or components can 
be reassembled by reversing the disassembly procedure. Things, if not strictly 
observed, that could result in injury or loss of life are described under the heading 
“Warning”. Precautions for any disassembly or assembly procedures are described 
under the heading “CAUTION”. Chips for disassembling procedures are described 
under the heading “CHECK POINT”. 
If the assembling procedure is different from the reversed procedure of the 
disassembling, the procedure is described under the heading “REASSEMBLY”.
Any adjustments required after reassembling the units are described under the heading 
“ADJUSTMENT REQUIRED”. When you have to remove any units or parts that are 
not described in this chapter, refer to the exploded diagrams in the appendix.

Read precautions described in the next section before starting.

4.1.1  Precautions

See the precautions given under the handling “WARNING” and “CAUTION” in the 
following column when disassembling or assembling EPSON Stylus C50/C60/C61/
C62...

W A R N I N G

„

Disconnect the power cable before disassembling or assembling 
the printer.

„

If you need to work on the printer with power applied, strictly 
follow the instructions in this manual.

„

Wear protective goggles to protect your eyes from ink. If ink gets 
in your eye, flush the eye with fresh water and see a doctor 
immediately.

„

Always wear gloves for disassembly and reassembly to avoid 
iujury from sharp metal edges.

„

To protect sensitive microprocessors and circuitry, use static 
discharge equipment, such as anti-static wrist straps, when 
accessing internal components.

„

Never touch the ink or wasted ink with bare hands. If ink comes 
into contact with your skin, wash it off with soap and water 
immediately. If irritation occurs, contact a physician.

„

When a lithium battery is installed on the main board of this 
printer, make sure to observe the following instructions when 
serving the battery:

1.Keep the battery away from any metal or other batteries so that 

electrodes of the opposite polarity do not come in contact with 
each other.

2.Do not heat the battery or put it near fire.
3.Do not solder on any part of the battery. (Doing so may result in 

leakage of electrolyte from the battery, burning or explosion. The 
leakage may affect other devices close to the battery.)

4.Do not charge the battery. (An explosion may be generated inside 

the battery, and cause burning or explosion.)

5.Do not dismantle the battery. (The gas inside the battery may hurt 

your throat. Leakage, burning or explosion may also be resulted.)

6.Do not install the battery in the wrong direction. (This may cause 

burning or explosion.)

Содержание Stylus Color C60





























































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Stylus Color C60

GCC Technologies 12 Ram Installation Manual preview
12
Бренд: GCC Technologies Страницы: 14
Panasonic KX-P8415 Setup And Reference Manual preview
KX-P8415
Бренд: Panasonic Страницы: 32
Samsung CLX-3305FW Manual Del Usuario preview
CLX-3305FW
Бренд: Samsung Страницы: 341
Samsung CLP-770ND - Color Laser Printer Quick Install Manual preview
CLP-770ND - Color Laser Printer
Бренд: Samsung Страницы: 2
Samsung CLP 610ND - Color Laser Printer Manual Del Usuario preview
CLP 610ND - Color Laser Printer
Бренд: Samsung Страницы: 114
Samsung CLP 500 Instructions Manual preview
CLP 500
Бренд: Samsung Страницы: 6
Samsung CLP 500 Paigaldusjuhend preview
CLP 500
Бренд: Samsung Страницы: 15
Samsung CLP 600N - Color Laser Printer User Manual preview
CLP 600N - Color Laser Printer
Бренд: Samsung Страницы: 227
Samsung CLP 600N - Color Laser Printer Manual Del Usuario preview
CLP 600N - Color Laser Printer
Бренд: Samsung Страницы: 118
Samsung CLP 300N - Network-ready Color Laser Printer Manual De Usuario preview
CLP 300N - Network-ready Color Laser Printer
Бренд: Samsung Страницы: 94
Samsung 3561ND - B/W Laser Printer User Manual preview
3561ND - B/W Laser Printer
Бренд: Samsung Страницы: 252
Samsung 3561ND - B/W Laser Printer Manual Del Usuario preview
3561ND - B/W Laser Printer
Бренд: Samsung Страницы: 127
Samsung 2252W - Printer - B/W Manual Del Usuario preview
2252W - Printer - B/W
Бренд: Samsung Страницы: 201
Samsung ML 2851ND - B/W Laser Printer Manual Del Usuario preview
ML 2851ND - B/W Laser Printer
Бренд: Samsung Страницы: 89
Baja Designs S8 Instructions Manual preview
S8
Бренд: Baja Designs Страницы: 6
Xerox 4450 Forms Creation Manual preview
4450
Бренд: Xerox Страницы: 108
Dancover EXPERT Manual preview
EXPERT
Бренд: Dancover Страницы: 31
F&F DRM-02 Instructions Manual preview
DRM-02
Бренд: F&F Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды