SC-S30600 Series
Revision B
DISASSEMBLY & ASSEMBLY
Disassembly and Assembly Procedure
191
Confidential
3.4.9.5 Tension Bar Upper Sensor / Tension Bar Lower Sensor
1.
Remove the screw, and remove the stopper.
A) Silver M4x12 screw: 1 pcs
2.
Remove the three screws, and remove the Sensor Cover.
B) Silver M3x8 P-tite screw with built-in washer: 3 pcs
3.
Disconnect the cable from the connector of the sensor.
4.
Disengage the hooks, and remove the sensor.
Figure 3-159. Removing the Sensor Cover
Figure 3-160. Removing the Tension Bar Upper Sensor
Route the cable through the hole on the Sensor Cover shown in the
figure below.
Sensor Cover
Cable
Hole
B
B
B
Stopper
A
Sensor Cover
- Right side -
Tension Bar Lower Sensor
Tension Bar Upper Sensor
Connector
Connector
Содержание SC-S30600
