Epson RIP Station 5100, Руководство администратора, Страница: 45 / 140

3
3-11 Network Setup options
The available network types and relevant Setup areas are summarized in the following
table. The Setup options are described in detail in the following pages.
T
O ACCESS
N
ETWORK
S
ETUP OPTIONS
:
1. Confirm that the network cable is connected to the RIP Station.
During Network Setup, the RIP Station queries the network for zones, servers, and
server-based queues. If you perform Network Setup without a connected and
functioning network, default settings are used that may not meet your needs.
2. Choose Network Setup from the main Setup menu.
3. Choose Port Setup from the Network Setup menu.
4. To use Ethernet, choose Ethernet Setup from the Port Setup menu, and enter the
appropriate settings.
5. To print to the parallel port, choose Parallel Port Setup from the Port Setup menu, and
enter the appropriate settings.
6. When you have finished entering port settings, choose Exit Port Setup and then choose
Protocol Setup.
7. Enter the appropriate settings for the protocol or protocols you will use.
For this Network or
Connection Type:
Use this Port Setup: Use this Protocol Setup: Use this Service Setup:
AppleTalk over Ethernet Ethernet Setup AppleTalk Setup AppleTalk printing (PAP) is
enabled automatically.
TCP/IP over Ethernet Ethernet Setup TCP/IP Setup: Ethernet Setup LPD Setup
Web Services Setup
Windows Setup
IPX/SPX over Ethernet Ethernet Setup IPX/SPX Setup PServer Setup (NDS,
Bindery, or both)
Parallel Parallel Port Setup — —