Epson RIP Station 5100 Скачать руководство пользователя страница 123 | Manualshive

Страница: 123 / 140

Epson RIP Station 5100 Скачать руководство пользователя страница 123

6

6-5

Troubleshooting the RIP Station

Enable NDS
(Network Setup>Service
Setup> PServer Setup > NDS
Setup)

No NDS trees found.

No NDS trees were found on the Novell network. Check
to see that the frame types on the RIP Station are properly
configured.

Select NDS Tree
(Network Setup>Service
Setup>PServer Setup>NDS
Setup)

Warning! Selecting a new NDS
tree deletes Bindery setup.

You have previously connected the RIP Station to a
different NDS tree. NetWise supports only a single NDS
tree connection. To avoid a potential conflict with an
existing tree connection (for example, if the connection
was made through a NetWare 4.x or 5.x server in
emulation mode), all bindery settings will be deleted.
If you choose OK, and choose Yes at the following message
(

Delete Bindery setup and continue?

), bindery settings are

deleted and must be re-entered in Bindery Setup.
To avoid deleting the bindery settings, press the Menu key,
or select OK and choose No in the following message
screen (

Delete Bindery setup and continue?

).

Repeat NDS Setup without changing the NDS tree, or exit
to Bindery Setup to review your current bindery settings.

Navigating NDS tree
(Network Setup>Service
Setup>PServer Setup>NDS
Setup)

___ is empty.

The chosen container contains no sub-containers or objects
relevant to the current mode of navigation.

Bindery Setup
(Network Setup>Service
Setup>PServer Setup>Bindery
Setup)

If you also plan to use NDS,
set up NDS before Bindery.

No NDS settings are present. You are reminded to perform
NDS Setup before Bindery Setup in case your network
includes both NDS and bindery servers.

Select File Server From List
(Network Setup>Service
Setup>PServer Setup>Bindery
Setup)

Error. Cannot open bindery
connection to NDS server.

Select this server through NDS setup or disable NDS and
select it through bindery.

No NetWare file
server found.

No file server was found when RIP Station queried the
network to create a list of supported servers or a list of all
servers.
Check cable connections and make sure the NetWare
server is turned on.

After this Setup screen:

This message:

Means:

«
...
121
122
123
124
125
...
»

Содержание RIP Station 5100













































































































































Отзывы:

Нет отзывов