manualshive.com logo in svg

Epson RIP Station 5100, Руководство администратора, Страница: 104 / 140

Поделиться
Скачать
Epson RIP Station 5100 Скачать руководство пользователя страница 104

5

5-4

Setting up Network Servers

There is no need to rerun Setup when adding or removing a NetWare queue; however 
you should reboot the RIP Station after a queue is created or removed. 

When the RIP Station is configured to connect to a NetWare server, it polls the 
NetWare server for jobs in each of its queues. If jobs are found, they are automatically 
transferred over the network to the matching connection on the RIP Station. For 
example, jobs from the NetWare queue with the 

_print

 extension are sent to the 

RIP Station Print queue, and so on. While a job is processed and printed, a record of 
the job is being created. You can access the Job Log containing these records at any 
time.

Configuring a NetWare server for printing

The following sections explain how to set up a NetWare file server so that network 
users can print to the RIP Station from their workstations, and the RIP Station can 
obtain print jobs from the NetWare server.

For each NetWare file server that you configure, follow these general steps. More detail 
is provided in subsequent sections and in your NetWare documentation.

• Make sure the server is connected to a functioning IPX network.

• Log in as the Supervisor on a PC connected to the NetWare file server.

• For NetWare 4.x or 5.x installations, set up an NDS connection (see page 5-6). 

• For NetWare 4.x or 5.x in emulation mode, set the bindery context (see page 5-6). 

• For NetWare 3.x and for NetWare 4.x or 5.x in bindery emulation, set up a file 

server, a print server, and a print queue for the RIP Station (see page 5-7). 

With bindery services, you can route all RIP Station print jobs through the same 
NetWare file server, or you can configure more than one file server to handle 
RIP Station jobs.

The functions you perform on the Novell server, on the RIP Station, and on the client 
workstation, are summarized in the following tables. The first table applies to NDS 
connections, the second to bindery connections. Complete the operations in the left 
column, then the center column, then the right column.

Содержание RIP Station 5100













































































































































Отзывы:

Нет отзывов