Epson PERFECTION V10 Скачать руководство пользователя | Manualshive

Страница: 4 / 77

background image

About This Manual

This manual describes basic functions, theory of electrical and mechanical operations, maintenance and repair procedures of the printer. The instructions and procedures included
herein are intended for the experienced repair technicians, and attention should be given to the precautions on the preceding page.

Manual Configuration

This manual consists of six chapters and Appendix.

CHAPTER 1.PRODUCT DESCRIPTIONS

Provides a general overview and specifications of the product.

CHAPTER 2.OPERATING PRINCIPLES

Describes the theory of electrical and mechanical operations of the
product.

CHAPTER 3.TROUBLESHOOTING

Describes the step-by-step procedures for the troubleshooting.

CHAPTER 4.DISASSEMBLY / ASSEMBLY

Describes the step-by-step procedures for disassembling and assembling
the product.

CHAPTER 5.ADJUSTMENT

Provides Epson-approved methods for adjustment.

CHAPTER 6.MAINTENANCE

Provides preventive maintenance procedures and the lists of Epson-
approved lubricants and adhesives required for servicing the product.

APPENDIX

Provides the following additional information for reference.
• Board connection and Connector’s signal alignment
• Electrical circuit boards schematics

Symbols Used in this Manual

Various symbols are used throughout this manual either to provide additional
information on a specific topic or to warn of possible danger present during a
procedure or an action. Be aware of all symbols when they are used, and always read
the NOTE, the CAUTION, or the WARNING messages.

Indicates an operating or maintenance procedure, practice or condition
that, if not strictly observed, could result in injury or loss of life.

Indicates an operating or maintenance procedure, practice, or condition
that, if not strictly observed, could result in damage to, or destruction of,
equipment.

May indicate an operating or maintenance procedure, practice or
condition that is necessary to accomplish a task efficiently. It may also
provide additional information that is related to a specific subject, or
comment on the results achieved through a previous action.

Indicates an operating or maintenance procedure, practice or condition
that is necessary to keep the product’s quality.

Indicates that a particular task must be carried out according to a certain
standard after disassembly and before re-assembly, otherwise the
quality of the components in question may be adversely affected.

«
...
2
3
4
5
6
...
»

Содержание PERFECTION V10














































































Отзывы:

Нет отзывов

Похожие инструкции для PERFECTION V10

IRIScan Book 5 Wif

Бренд: Canon Страницы: 32

Бренд: SICK Страницы: 18

Бренд: ION Страницы: 40

Бренд: Atid Страницы: 13

Бренд: Raven Страницы: 2

Бренд: Shining 3D Страницы: 124

Copiscan 8000 Plus Series

Бренд: Bell and Howell Страницы: 94

Бренд: I.R.I.S. Страницы: 4

Бренд: TEC Страницы: 16

Бренд: Pyle Страницы: 20

Бренд: Shenzhen Zeus Technology Страницы: 16

Бренд: Nikon Страницы: 112

MDI-4 00/N210 Series

Бренд: Opticon Страницы: 16

Бренд: Radio Shack Страницы: 23

RoadRunner BRR-FS

Бренд: Baracoda Страницы: 44

Бренд: Veho Страницы: 29

Бренд: Uniden Страницы: 56

Бренд: Canon Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды