3. Set the date and time using the
4-way ring
.
4. After you finish all settings, select
Complete
using the
Right
or
Left
key, then press the
OK
key.
Note:
❏
If approximately 24 hours passes after removing the battery, the date and time settings may be lost,
and will need to be set again.
❏
If the date and time settings are erased, the Date and Time screen is displayed when you turn on
the viewer next time.
❏
After changing the battery, make sure that the date and time is set correctly. If necessary, set the
date and time again.
❏
You can change the settings later. For details, see "Changing the Viewer Settings" on page 83.
Turning the power off
1. Make sure that the
Access
lamp is off.
2. Slide the power switch to
as shown below and hold it down for several seconds until the shut
down display appears. The power switch will return to the original position.
R41A0K180 User’s Guide
Getting Started
23
Содержание P6000 - Multimedia Photo Viewer
Страница 1: ...User s Guide NPD3303 00 EN ...