Epson P6000 - Multimedia Photo Viewer, Руководство пользователя

Страница: 16 / 113

❏
Unplug the viewer from the power outlet before cleaning it. Use a damp cloth for cleaning and
do not use liquid or aerosol cleaners.
❏
Remove the battery from and unplug the viewer and refer servicing to qualified service personnel
under the following conditions: The power cable or plug is damaged; liquid has entered the viewer
or its accessories; the viewer or its accessories have been dropped or the case is damaged; the
viewer or its accessories do not operate normally or exhibit a distinct change in performance.
Safety information for United Kingdom users
The following safety information applies to the AC adapter.
w
Warning:
Refer to the rating plate for the voltage and check that the appliance voltage corresponds to the
supply voltage.
Important:
The wires in the mains lead fitted to this appliance are colored in accordance with the following code:
Blue — Neutral
Brown — Live
As the colours of the wires in the mains lead of this appliance may not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows;
The blue wire must be connected to the terminal in the plug marked with the letter N.
The brown wire must be connected to the terminal in the plug marked with the letter L.
If damage occurs to the plug, replace the lead set or consult a qualified electrician.
For United Kingdom, Hong Kong, and Singapore users
Replace fuses only with fuses of the correct size and rating.
Safety requirements
Main plug Use a 3-pin or a 2-pin main plug that is registered with the Safety Authority.
Flexible cord
Use a double insulated flexible cord that is certified
*
to the relevant IEC or BS
standards.
R41A0K180 User’s Guide
Safety Instructions 16