Epson LQ-1060, Техническое руководство, Страница: 58 / 253

1. Outline
The color-inked ribbon is divided into four strips as shown in Figure 2-6. One strip can be selected by
vertically moving the color ribbon cartridge using point of the carriage as a fulcrum.
Color Cartridge
/
— - -
[Selected Color]
6.075 Yellow
2.025 ..,. Magenta
.
-— Printing Point
Carriage
“
-
-
Down
Figure 2-6. Color Ribbon Strip Selection
2.
Operations
Figure shows the color select mechanism. When rotates, its
converted to up
or down movement of the drive lever via the various gears (see Table 2-12). As the
drive lever moves up or down, the color ribbon cartridge moves up or down.
Table 2-12. Color Select Gear Train
Motor
Rotation
Gear Train
motor pinion gear Ribbon feed transmission gear A
Ribbon feed gear Ribbon feed transmission gear B
I
reduction gear CS drive cam CS drive Lever
The cartridge location spring pushes the ribbon cartridge to the CS drive lever via the cartridge location pin
to lock the ribbon cartridge. A color section of the color ribbon is selected by moving the motor to
the color ribbon position using point as a start point (color home position: black ribbon
Figure 2-7 a). At this time, the color home position is detected by the CS sensor.
When the black ribbon cartridge is mounted at the carriage, the projection the carriage prevents the
bottom face of the ribbon cartridge from touching the CS driver lever.
As a result, the drive lever going up or down never touches the bottom face of the black ribbon cartridge,
and the color selection mechanism is functionally canceled. (See Figure 2-7 b).).
2-11