manualshive.com logo in svg

Epson LQ-1060, Техническое руководство, Страница: 176 / 253

Поделиться
Скачать
Epson LQ-1060 Скачать руководство пользователя страница 176

4 . 3   A D J U S T M E N T

This section describes the adjustment procedures required when reassembling this printer. When disas-

sembly or replacement is performed during maintenance or 

 of the parts described in this section,

the following adjustments should be performed to ensure proper operation.

4.3.1 Printer Mechanism Adjustment

This section describes the printer mechanism adjustment.

4.3.1.1 Platen Gap Parallelism Adjustment

This adjustment corrects the parallelism between the platen and carriage guide shaft 

B.

Perform this adjustment in the following cases :

● 

W h e n

● 

W h e n

Step 1 :

Step 2:

Step 3:

Step 4:

NOTES :

Step 5:

Step 6:

 7:

the parallel adjustment bush is moved.

the parallel adjustment bush is removed.

Remove the printer mechanism (Refer to Section 4.2.4.1.).

Remove the 

 (Refer to Section 4.2.4.2.).

Remove the ribbon mask holder with the ribbon mask.

Reinstall the 

 on the carriage.

When reinstalling the 

 lock the head lock levers while pushing the 

 forward

and downwoard.

Move the carriage to the left, set the thickness gauge in position, and rotate the carriage guide

shaft B so that the gap becomes 0.41   0.02 mm. (At this time, temporarily set the head

adjustment lever at the 2nd position from the bottom.)

Move the carriage to the right, insect the thickness gauge, and rotate the parallel adjustment

bush so that the gap becomes 0.41   0.02mm.

Repeat steps 5 and 6 until the left and right platen gaps become the same (until carriage guide

shaft B and the platen become parallel).

Ribbon Mask

Holder

Carriage

   

Figure 4-44. Ribbon Mask Holder Removal

4-34

Содержание LQ-1060






























































































































































































































































Отзывы:

Нет отзывов