Epson Expression Home XP-2200 Series, Руководство пользователя

Страница: 64 / 171

4.
Check the printed pattern to see if the print head nozzles are clogged.
❏
A:
All lines are printed. No further steps are needed.
❏
B or close to B
Some nozzles are clogged. Hold the
y
button down for five seconds until the power light starts flashing.
Print head cleaning starts.
Note:
It may take some time to start print head cleaning.
❏
C or close to C
If most lines are missing or not printed, this indicates most nozzles are clogged. Run Power Cleaning. For
details, see "Related information" below.
5.
When the power light stops flashing, print a nozzle check pattern again. Repeat cleaning and printing the
pattern until all lines are printed completely.
c
Important:
If print quality has not improved after repeating nozzle check and head cleaning 3 times, wait for at least 12 hours
without printing, and then run the nozzle check again and repeat the head cleaning if necessary. We recommend
turning off the printer by using the
P
button. If print quality has still not improved, run Power Cleaning.
Related Information
&
“Running Power Cleaning” on page 64
Running Power Cleaning
The Power Cleaning feature may improve print quality in the following cases.
❏
When most nozzles are clogged.
❏
When you have performed a nozzle check and head cleaning 3 times and waited for at least 12 hours without
printing, but print quality still did not improve.
c
Important:
The Power Cleaning uses more ink than the print head cleaning.
Maintaining the Printer
>
Improving Print, Copy, and Scan Quality
>
Running Power Cleaning
64