Epson Equity III, Информационный бюллетень по поддержке продукции

Страница: 91 / 103

E P S O N
EPSON
AMERICA INC.
SERVICE DEPARTMENT
PRODUCT
SUPPORT
BULLETIN
DATE: 6/8/87
NUMBER:
S-0011
SUBJECT: MS-DOS 3.2 SELECT COMMAND - MANUAL ERROR
A documentation error has been identified in the MS-DOS version
3.2 manual which is supplied with the Equity It and III+, there is
an error in the documentation for the
SELECT
command. This error
also occurs in the HELP utility data file.
In the respective sections on using
the Equity hard disk drive,
the syntax is given as:
SELECT C: 001 US
Also,
in the HELP utility, the format is given as:
SELECT [DOS
source d:] [target d:] xxx yy
with the square brackets
indicating optional command line
parameters. This turns out
not to be the case; both source and
destination drives are required parameters.
-
there are two
solutions.
One is to use the "traditional"
method for logical formatting:
FORMAT C: /S/V
or use the correct
SELECT
syntax:
SELECT A: C: 001
US
Page 1 of 1