Epson Equity III, Информационный бюллетень по поддержке продукции

Страница: 38 / 103

NUMBER:
S - 0 0 6 1
PAGE:
11
of 13
Equity
III+ (12
MHz)
ROM
BIOS
Version: 2.00
Memory: 640KB Base, no extended/expanded
Clock Speeds: 6/8/12 MHz
Monitor: Monochrome
Video Adapter: Monochrome
DOS Version Tested: Epson MS-DOS 3.20
Mass Storage:
1
- 1.2MB FDD;
1
- 40MB HDD (Drive Type 45)
Hard Disk Controller: Western Digital WD1003-WAH
The Equity
III+
(12 MHz) is approved as a Novell file server,
with the following limitations:
-
The
III+
(12 MHz) will not boot to DOS using the IBM CLUSTER
card.
-
The
III+
(12 MHz) will not function correctly at 12 MHz with
NetWare SFT Level
II
2.1 Proteon or IBM Token Ring Network
workstation shell drivers.
It
will function correctly at 8 MHz
with these drivers.
-
The
III+
(12 MHz) will not function correctly at 12 MHz with
the Novell DCB; however, it will function correctly at 8 MHz
with the DCB.
- The Novell
NIC
and
INIC
shells will often not function in
machines running faster than 8 MHz; because of that, the
III+
(12 MHz) will not run as a workstation at 12 MHz with
the
INIC
and
INIC
(non-interrupt) shell drivers.
It
will
function correctly at 8 MHz.
NetWare Utilities
COMPSURF:
INSTALL:
Passed
Passed
Configurations tested with Advanced NetWare 86 2.0a
NETWARE DRIVER CONFIGURATIONS
STATUS
GENBIOS
(86)/IBM PC-NET:
Passed
86
SCSI
DIB Configuration
Passed
IBM
CLUSTER (86):
Failed
Comments: The
III+
(12 MHz) will not boot to DOS using the
IBM
CLUSTER card.
Configurations tested with Advanced NetWare ND286 2.0a
NETWARE DRIVER
CONFIGURATIONS
STATUS
GENBIOS
(ND286) :
Passed